Antialgae CTX 575 in 1 liter (special black algae)

Antialgae CTX 575

• Antialgae CTX 575
• Manufacturer: CTX
• Code: 71653
• Format: 1 liter.
• Excellent algaecide power, especially with green, red, brown, black and yellow algae.

TREATMENT AND DOSAGE:

Add 500 ml per 50^m3 of water. Add directly to the pool water or in the skimmer

This product should be added when there are no swimmers in the pool and at dusk.

1. Turn off the filtering system.

2. Use a brush to vigorously scrape the affected areas.

3. Add the product to the affected areas.

4. Leave the product for 4 to 8 hours depending on the type of algae and brush again.

5. Turn the filtering system back on. Repeat the process one week later if there are still traces of black algae.

INSTRUCTIONS FOR USE:

This product is able to remove green algae which are a type of algae has a tendency to remain suspended in the water, giving a green coloration. They also tend to adhere to the entire surface of the vessel. In addition, it is capable of eliminating brown, yellow and red algae that have a tendency to adhere to the walls and entrench themselves in areas that are difficult to access. Yellow-brown algae usually spread over the entire surface of the vessel walls. They give a yellowish effect to the pool water. At the same time, it has the ability to eliminate black algae, which appear in the form of small isolated spots and are usually located in strategic and often difficult to access points. Traditional treatments are generally ineffective for their elimination. Caution: This product is not recommended for liner and polyester pools as the accumulation of copper in the water can cause stains to appear on both the bottom and walls of the pool.